新闻动态
路边石（路沿石）材质要求
路边石（路沿石）材质要求 按统一长度进行下料，外露面必须机切抛光，长度允许误差在±20mm范围内，宽度、厚度、高度允许误差在±2mm范围内。
The material of roadside stone (road along stone) is required to be fed in a uniform length. The outer surface must be cut and polished by machine. The length allowable error is within the range of + 20mm, and the width, thickness and height are allowed in the range of + 2mm.
市政工程中路边石（路沿石）施工要求有哪些？
What are the requirements for construction of roadside stone (roadside stone) in municipal works?
1.路边石（路沿石）必须挂通线进行施工,按侧平面顶面示高标线绷紧，按线码砌侧平石，侧平石要安正，切忌前仰后合，侧面顶线顺直圆滑平顺，无高低错牙现象，平面无上下错台、内外错牙现象。
1. roadside stone (road along stone) must hang through the line to carry on the construction, according to the top surface of the side plane to show the high standard line tight, according to the line code side flat stone, the side flat stone should be safe, avoid the front and back, the side top line smooth and smooth, no high and low wrong teeth phenomenon, the plane has no upper and lower wrong platform, and the internal and external wrong teeth phenomenon.
2.路边石（路沿石）必须座浆砌筑，座浆必须密实，严禁塞缝砌筑；
2. the roadside stone (roadside stone) must be built in slurry, and the slurry must be dense.
3.路边石（路沿石）接缝处错位不超过1mm；侧石和平石必须在中间均匀错缝。
3. the dislocation of the roadside stone (road edge stone) joint is not more than 1mm; the side stone and peace stone must be evenly sewed in the middle.
4.路边石（路沿石）侧平石应保证橡胶托辊 槽型托辊 皮带托辊 平行托辊 保定搬家 保定搬家电话 保定搬家公司 保定搬家 铜鼎 铜狮子 尺寸和光洁度满足设计要求。外观美观，对弯道部分侧石应按设计半径专门加工弯道石，砌筑时保证线形流畅、圆顺、拼缝紧密。弧形侧石必须人工精凿后抛光处理。
4. side stone (roadside stone) side stone should ensure that the size and finish meet the design requirements. The appearance is beautiful. The side stones of the curve should be specially designed for the curved stones according to the design radius. The curved side stone must be polished and treated manually.
The material of roadside stone (road along stone) is required to be fed in a uniform length. The outer surface must be cut and polished by machine. The length allowable error is within the range of + 20mm, and the width, thickness and height are allowed in the range of + 2mm.
市政工程中路边石（路沿石）施工要求有哪些？
What are the requirements for construction of roadside stone (roadside stone) in municipal works?
1.路边石（路沿石）必须挂通线进行施工,按侧平面顶面示高标线绷紧，按线码砌侧平石，侧平石要安正，切忌前仰后合，侧面顶线顺直圆滑平顺，无高低错牙现象，平面无上下错台、内外错牙现象。
1. roadside stone (road along stone) must hang through the line to carry on the construction, according to the top surface of the side plane to show the high standard line tight, according to the line code side flat stone, the side flat stone should be safe, avoid the front and back, the side top line smooth and smooth, no high and low wrong teeth phenomenon, the plane has no upper and lower wrong platform, and the internal and external wrong teeth phenomenon.
2.路边石（路沿石）必须座浆砌筑，座浆必须密实，严禁塞缝砌筑；
2. the roadside stone (roadside stone) must be built in slurry, and the slurry must be dense.
3.路边石（路沿石）接缝处错位不超过1mm；侧石和平石必须在中间均匀错缝。
3. the dislocation of the roadside stone (road edge stone) joint is not more than 1mm; the side stone and peace stone must be evenly sewed in the middle.
4.路边石（路沿石）侧平石应保证橡胶托辊 槽型托辊 皮带托辊 平行托辊 保定搬家 保定搬家电话 保定搬家公司 保定搬家 铜鼎 铜狮子 尺寸和光洁度满足设计要求。外观美观，对弯道部分侧石应按设计半径专门加工弯道石，砌筑时保证线形流畅、圆顺、拼缝紧密。弧形侧石必须人工精凿后抛光处理。
4. side stone (roadside stone) side stone should ensure that the size and finish meet the design requirements. The appearance is beautiful. The side stones of the curve should be specially designed for the curved stones according to the design radius. The curved side stone must be polished and treated manually.